Kintowe K652 is a high pressure rod seal designed specifically for longwall mining applications.The seal design comprises three elements: a polyurethane shell , an O-ring energizer and a polyacetal / PFC anti-extrusion ring.The shell is manufactured in  Kintowe ®01 to provide flexibility for installation and responsiveness to the sealing lip .The rubber energizer ensures complete lip actuation under all pressure conditions and cushions the seal against shock loadings.The anti-extrusion ring enables the seal to with stand side loads and extreme pressure peaks during operation , even with the extrusion gaps which are the result of using remote plastic bearing strip such as Kintowe PFC .

Kintowe K730 is a top of the range double acting piston seal. It is constructed with a tough wear resistant thermoplastic polyester(TPE) face , which is loaded by a profiled nitrile energizer . Material options can be provided for the sealing face, including lubricated polyester and PTFE , All designs have rectangular polyacetal anti-extrusion rings . The TPE face is suitable for both roller-burnished and honed tubing .The above operating conditions are for the HFA medium (water based) in the long arm mining hydraulic support.

Kintowe K038 has been designed so that the proportions of the wiping lip ensure it maintains contact with the rod surface to remove heavily deposited mud, ice etc . The outside diameter contacts the housing and has a sealing lip to prevent moisture entering the groove .A polyester based material is used to provide a tough abrasion resistant wiper for the difficult conditions usually found in mining or earth moving applications . All the range can be used with a split housing , however , the majority can be installed in a blind housing with care .Kintowe K038 is manufactured by high performance  polyurethane Kintowe®06,  It provides the following benefits.

Kintowe K842 rod wiper is designed to prevent the ingress of external particles and moisture into the cylinder. The profile has been specially developed for harsh environments, in particular the longwall mining industry.The special feature is the flap on wiping which covers the gland housing , preventing the water/slurry trap so common with conventional wipers and thus ingress of contamination around the outside of the wiper.The internal ribs on the inside diameter prevent the possibility of pressure trapping between the gland seal and the wiper and ensure correct support and guidance of the wiping lip , even in cases of high eccentricity as can occur between the outer stage gland and the inner cylinder of a roof support leg.K842 is precision moulded in high performance polyurethane-KINTOWE®01 , the material has excellent compression set characteristics, excellent wear and abrasive resistance, proven compatibility with HFA(95/5) fluids , as used in longwall mining equipment , and with mineral oil.

Kintowe155 U-ring static seal is designed to seal the connection between the gland and the cylinder hole. Kintowe155 replaces the traditional combination of O-ring and spare ring.This seal is developed for water-based and HFA applications, but it can also be used with standard mineral oils.

Kintowe PFC-3 is a high-strength composite material that uses thermosetting phenolic resin as the substrate and high-quality high-strength polyester fiber fabric as the reinforcing material. It is synthesized by advanced technology at a certain temperature and pressure. It can be used for high-pressure cylinder guide support rings with strong vibration in working conditions (such as excavators, piling machines, coal mining machinery, etc.).After the material is filled with a certain amount of solid lubricating material, it can also be used for various types of bushings, bearings, thrust plates and other mechanical parts.

PFC-6 high-strength composite material is based upon new type of phenolic resin, reinforced with specialty synthetic fiber and processed under certain temperature and pressure.

PFC-7 is based on modified phenolic resin reinforced with ultra strong special fiber,added ith solid lubricants, processed under certajn temperature and pressure.Compare to other fiber-reinforced (cotton fiber, polyester fiber,polyamide fiber and so on) phenolic products.

The S lip is the standard lip profile design. It offers redundant sealing surfaces with radiused contact areas for medium unit loading. This design feature provides the best combination of wear and seal ability , making the S lip suitable for the widest range of applications.

The A lip employs a large radius, and therefore low unit loading, resulting in low friction and low wear. This lip profile is recommended for applications with high surface speeds or those that require low friction. The profile also facilitates installation in glands with insufficient lead-in chamfers.

The B lip profile produces the highest unit loading of all of the lip profiles offered by Kintowe. The B lip is recommended for use in static applications and is required when the FanSaiSeal component diameter is less than 3/16” (4.7mm).

The C lip provides a flat sealing surface which allows for a constant wear rate over the life of the seal, making it ideal for rotary applications where extending seal life is the primary goal.

The D lip profile’s low unit loading characteristics offer long wear, with somewhat less effective sealing than higher unit loaded seals. This design is particularly well-suited for reciprocating applications.

The E lip profile is a radiused lip profile similar to the S lip, but with a single point of contact. This lip profile generates the lowest friction of any V-Spring FanSaiseal and has extremely high seal ability. This lip is best suited for static sealing applications and light oscillating applications where tight sealing is required.

The F lip features a profile suitable for systems contaminated with abrasives. Lower unit loadings offer extended seal life in rotary applications.

The J lip also has redundant sealing surfaces, with the sharp front edge protecting the secondary, radiused surface from abrasive media.Besides use in scraping applications, this lip is also used with step-cut glands and is the preferred profile for use with high-viscosity media.

YT Soft Tape for Guide-way, a kind of turning soft Tape made of PTFE, filled, modified, and surface activated, has excellent friction and wear-resistance characteristic and almost same static and dynamic friction coefficients. As a kind of novel material, it can be used in the manufacturing and repairing of machine tools, especially can be used as the guide way's abrasion-proof surface on precision machine tools. Machine tools equipped with the YT soft tapes can avoid the crawling phenomenon effectively, avoid abrasion to guide set,locate exactly quickly and move smoothly for sure； and will produce no tremor.YT guide soft tape can also be used as a self-lubricating, wear-resistant sliding bushing/gasket, which is easy to use with good wear resistance.

Due to the excellent characteristics of fluorocarbon resin (PTFE) such as low friction, corrosion resistance, and thermal stability, it has been widely used as friction and sealing parts, especially in corrosive media, and this problem is often difficult to solve for general metals and other non-metallic materials.Especially when it is further modified by various filling and compounded with certain aromatic resins into plastic alloys, higher carrying capacity, thermomechanical stability, wear resistance and PV limit values can be obtained.Our company is a professional processing plant for fluorocarbon resin products, and is engaged in the research of its modification and technology.Products include plates, bars, pipes, flexible belts, and parts such as bushings, seals, gaskets, balls and bowls.In order to meet the needs of cylinder or hydraulic cylinder guide support under working conditions such as difficult lubrication or oil-free lubrication and high lateral pressure, the company has developed several different formulas of DFG guide belt materials, and has been successfully used as a guide ring and support ring for hydraulic cylinders or cylinders of compressors, cranes, loaders and other construction machinery.

DF-101 has excellent electrical and non-adhesive properties,high chemical stability, and temperature resistance (from -250℃ to +260℃ ). 

DF-102 is made of inorganic non-metallic materials filled and modified.It has excellent elongation and can be used in combination with rubber.

With high filling content of metallic and nonmetallic materials,DF-103 has good thermal conductivity, high compressive strength, good rigidity, stable dimension , and wear resistance properties, and can work oil-free or boundary lubrication condition with shock-absorbing and anti-grinding characteristics.

DF-104 adopts polytetrafluoroethylene to add lubricating materials and wear-resistant materials.

Containing lots of metallic filling and modifiers, DF-105 has high metal content, so it has excellent heat conduction performance, stable dimension, is abrasionproof. It is the type with highest compressive strength among all DF series materials.

With ultra-refined PTFE substrate, modified and processed by filling various metallic and inorganic non-metallic materials, the material have excellent anti-wear and self-lubricating properties, good elongation percentage, thermal conductivity, and compressive strength basing on many good formulas.

DF-L series bearings are bearings equipped with bevel/straight joint bushings made of DF soft tapes, with a length equal to the bearings' circumferencecalculated according to their diameter. The bushing is lined in the short metallic sleeve with block, and can move freely inside the metallic sleeve.

With 20 years history in producing modfed PTFE products, Kintowe (ompany has accumulated rich experience in producton, and developed sem-inished mounding products of modifed PTFE in various formulas, such as tube materials, pipe materials and rod materials used as sealing parts. We can also produceaccording to customers’formulas, providing the best service to meet customers' requirments.

On the basis of experiences of production and processing of modfed PTFE products by more than 20 years acumulation,combing the sealing characteristics andrequire-ments of current hydraulic system,our company has developed a variety of sealing components for hydraulic system, such as al kinds of gyd rings. stepseals, dirt retainers,fencing rings etc used for hydraulic ylinder pistons and piston rods. 

PFC-1 is high-strength laminated material based upon the thermosetting phenolic resin and reinforced with high-quality cotton fiber and finally finished with heat solidifying process under certain pressure and temperature. This material is featured in its high load sustainability, excellent temperature resistance, abrasion resistance and excellent dimensional stability. 

PFC-2 material is a high-strength composite material formed by thermosetting at a certain temperature and pressure using soluble phenolic resin containing evenly dispersed graphite and high-quality cotton fiber fabric.

Kintowe PFC-3 is a high-strength composite material that uses thermosetting phenolic resin as the substrate and high-quality high-strength polyester fiber fabric as the reinforcing material. It is synthesized by advanced technology at a certain temperature and pressure. It can be used for high-pressure cylinder guide support rings with strong vibration in working conditions (such as excavators, piling machines, coal mining machinery, etc.).After the material is filled with a certain amount of solid lubricating material, it can also be used for various types of bushings, bearings, thrust plates and other mechanical parts.

The material uses carbon fiber fabric impregnated with phenolic resin containing a solid lubricant, and is a high-performance material formed by advanced technology at a specific temperature and pressure.

PFC-5 high-strength composite material is composed of high quality cotton fabric, solublephenolic resin and MOS2 and processed under certaintemperatureand pressure. PFC-5 has good mechanical strength, wear resistance and heat resistance, capable of absorbing semi-static high shock loading and slight rotate loading.

PFC-6 high-strength composite material is based upon new type of phenolic resin, reinforced with specialty synthetic fiber and processed under certain temperature and pressure.

PFC-7 is based on modified phenolic resin reinforced with ultra strong special fiber,added ith solid lubricants, processed under certajn temperature and pressure.Compare to other fiber-reinforced (cotton fiber, polyester fiber,polyamide fiber and so on) phenolic products.

PFC-20 is composed of synthetic fiber, reinforced polyester resin and self-lubricating micro powders.

PFC-21 is composed of specialty synthetic fiber, reinforced polyester resin and self-lubricating micro powders.

PFC-22 is composed of specialty synthetic fiber, reinforced polyester resin and solid lubricants and other ingredients.

PFC-3T and PFC-20T has the same substrate material with PFC-3 and PFC-20, produced by special manufacturing process, the performance issame as guide rings. 

Spherical bearings are generally used for swing movement (ie angular movement) at lower speeds. Since the sliding surface is spherical, it can also be tilted within a certain angle range (ie self-aligning movement), and it can still work normally when the support shaft and the shaft shell hole are not at the same degree of eccentricity.The company's spherical bearings are processed from composite materials such as laminated phenolic or polyester resin laminated cloth. There is almost no electrochemical corrosion in seawater or other aqueous solutions, so they will not rust.

Relying on matured production technology and tremendous productivity on high-strength fabric series products, Kintowe Company provides all kinds of fabric series pipe materials to customers, and satisfy all demands from customers with high quality, full range of specifications and timely supply.

PFC-6 FeaturesA high-strength fiber-reinforced composite material manufactured using a unique process that maintains high compressive strength for wear resistance while preserving low friction properties. PFC-6 has demonstrated unparalleled adaptability in complex operating environments across diverse conditions.PFC-22 FeaturesAn advanced reinforced composite containing solid lubricants. This material exhibits exceptional wear resistance, minimal water swelling, and dimensional stability. It withstands edge loading and deflection even under the heaviest loads. Marine bearings are installed with interference fits. Bearings are typically cryogenically installed using liquid nitrogen, though press-fitting or resin plugging is also available as needed. PFC-22 proves particularly effective under prolonged lubrication-free conditions, such as upper rudder pivot bearings in light ballast scenarios. Multiple grades are available to meet diverse vessel requirements, offering resistance to silt and dry grinding. The material is cost-effective, easy to machine, and simple to install, with rapid customization available per user specifications.

Spherical bearings are generally used for swing movement (ie angular movement) at lower speeds. Since the sliding surface is spherical, it can also be tilted within a certain angle range (ie self-aligning movement), and it can still work normally when the support shaft and the shaft shell hole are not at the same degree of eccentricity.The company's spherical bearings are processed from composite materials such as laminated phenolic or polyester resin laminated cloth. There is almost no electrochemical corrosion in seawater or other aqueous solutions, so they will not rust.

The POLYESTER LUBRICATION series bearings (PFB) in Kintowe product series are continuously wound with glass fiber and epoxy resin material (bearing layer), filled with PTFE fiber and high strength fiber internal lubricant and high temperature epoxy resin as sliding layer, so as to form a natural concentric high strength bearing without joint and overlap This high-strength laminate structure allows bearing wall thickness of only (1.59mm-3.18mm), reducing product size and bearing weight during assembly such composite bearings exhibit extremely low friction coefficients and high bearing capacity